The Polar-PV module is a thin film photovoltaic module with amorphous silicon (a-Si) devices monolithically integrated. The electrical specifications shown below are stabilized values measured at Standard Report Conditions: 1000W/m2 irradiance, AM1.5 spectrum at 25â?? while Voc or Isc can be customized. Maximum power rating under standard report conditions: WP = 41 W �± 10 % Rated operating voltage: Vm = 59.0 V �± 5 % Rated operating current: Im = 0.70 A �± 5 % Open circuit voltage: Voc = 77 V �± 5 % Short circuit current: Isc = 0.90 A �± 5 % Temperature coefficients: Pm = â?? 0.2% / �°C Bypass diode: 6 A 1000 V Maximum system voltage: 600 V Lateral structuring: Laser pattern Fixture: Aluminum frame or frameless Dimensions: Width x Length x Depth 25 inch x 49 inch x 0.275 inch (635mm x 1245 mm x 7 mm) Temperature Range: â?? 40�°C to +85�°C Weight: 30 lbs. (13.7 kg) ï?§ Output of electricity in the first few months of operation will exceed the specified ratings around 15% for power output. ï?§ Other factors, such as operation at higher temperature, change of spectrum and other relevant factors, may cause actual performance to vary up to 10% from rated parameters. ï?§ Module is glass to glass laminated. ï?§ IEC61646, IEC61730-2 qualification, T�?V and UL testing are pending. ï?§ Twenty years limited warranty.