I want to buy the product which spec is given bellow:
SPECIFICATIONS OF LDHP PE GRANULES

[These LDHP Polyethylene (PE) granules are used for Intravenous (I.V.) Fluid Bottles]

SL. NO. TESTS SPECIFICATIONS
01 Characters Beads, granules, powder or after transformation, translucent sheets of varying thickness or containers, practically insoluble in water, soluble in hot aromatic hydrocarbons, practically insoluble in ethanol, in hexane and in methanol. It softens at temperatures above 650 C.

The relative density of the material is 0.910 to 0.937.
02 Identification A. The IR spectrum obtained is identical to that obtained with the material selected for the type sample.

B. No spot appears in the chromatogram obtained with the test solution.

03 Appearance of solution Solution S1 is clear and colourless.

04 Acidity or alkalinity NMT 1.5ml of 0.01M NaOH is required to change the colour of the indicator to blue.
NMT 1.5ml of 0.01M HCI is required to reach the beginning of the colour change of the indicator from yellow to orange.
05 Absorbance The absorbance of solution S1 is not greater than 0.20 at wavelengths from 220 nm to 340nm.
06 Reducing substances The difference between the titration volumes is not greater than 0.5ml.

07 Substances solution in hexane The mass of the residue obtained is within 10% of the residue obtained with the type sample and does not exceed 5%.
08 Additives No spot appears in the chromatogram obtained with the test solution.

09 Extractable heavy metals NMT 2.5 ppm
10 Sulphated ash NMT 0.2% w/w

11 Microbial Limit NMT 30 cfu /120g

12 Bacterial endotoxins NMT 0.25 IU/ml