Oil proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wells???length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
High strength oil fracture proppant physical and chemical properties sheet (Standard oil and natural gas of the People???Republic of 3Y using standard SY/T5108-2006 )
MAIN TECHNICAL PARAMETERS AND INDEX
SPECIFICATION BULK
DENSITY(g/cm3) APPARENT
DENSITY(g/cm3) CLOSE
PRESSURE(Mpa) PERCENTAGE OF CRUSHING (%) SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH ???.80 ???.35 69 ???8.0 ???.8
HIGH DENSITY
20MESH-40MESH ???.80 ???.35 69 ???.0 ???.8
HIGH DENSITY
30MESH-50MESH ???.80 ???.35 69 ???.0 ???.8
MIDDLE DENSITY
16MESH-30MESH ???.80 ???.35 69 ???8.0 ???.8
MIDDLE DENSITY
20MESH-40MESH ???.80 ???.35 52 ???.0 ???.8
MIDDLE DENSITY
30MESH-50MESH ???.80 ???.35 69 ???.0 ???.8