DireDirections for Use:
1.Wood moisture content should be controlled in the 8-15% too high or too low will affect the bonding quality.
2.Treatment of the substrate surface to be without oil, dust and other impurities on it.Adhesive surface must be fully
exposed .
3.Coating should be uniform and appropriate.
4.Curing at room temperature or be heat cured. The maximum temperature should not exceed 120 ?.The cure time
varies due to temperature, that can be set according to actual situation.
5.The pressure should be sufficient and uniform. More than 1.5 hours should be pressurized. Relief landscapes after
a period of time, to achieve better adhesion. It should be relief for 24 hours and then after 72 hours for testing.
6. Can be mixed with some resins such as urea-formaldehyde resin, melamine resin and phenolic resin to improve their own impatience water-based and creep.