We are, today, living in a world of competition. The survival of the fittest is not only an adage by Darwin, its a way of life! And to live such a life we need quality inputs to provide quality products We introduce ourselves as the sole manufacturers of cut-wire shots & metal powders conforming to ISO 9001-2008 standards apart from other quality certificates by various organizations. Our customer base will vouch for the same.We were forced to write you regarding this subject because we are having one of the latest technologies related to metal powders. We manufacture metal powders from cold drawn wires with virgin material properties. It has been observed that aluminium oxide powder is the most widely used in blast finishing and surface preparation due to soft, lightweight, ductile & malleable metal with appearance looks like dull / matt grey finish on components. But it has uneven angular shape, un-durable blasting abrasive, un-recycled property, low longevity, low hardness (1440 mpa- 147 kg/mm2), low density (2.70-3.89 gm/cc), and most of the important is higher purchase cost (app. Rs. 220/- per kg.). Due to angular / uneven shape, the surface of blasted components get create high roughness (Ra value) and also caused of high consumption of surface coatings like paints in further operations. Aluminium has about one-third the density and stiffness of steels and less corrosion resistance due to react when the metal is exposed to air. Aluminium is a stronger reducing agent then steel / stainless steel. We are introducing steel & stainless steel powder in all grades & alloy compositions to replace the older methods of blast finishing & surface preparation of any type of components. The steel & stainless steel powders are available in all sizes as required by end users. It is also available in soft / hard nature depends on required applications with appearance looks like bright / silvery finish on components. It has also available in even shape, durable abrasive, recycled property, high longevity, higher hardness (1800 mpa- 185 kg/mm2 & above), high density (7.8 gm/cc), and most of the important is lower purchase cost (app. Rs. 105/- per kg.). Due to even shape, the surface of blasted components get low roughness (Ra value) with smooth finish and also beneficial for low consumption of surface coating like paints in further operations. Stainless steel powder is the stronger corrosion resistance agent due to chromium & nickel elements.We are supplying our products to all major OEMs in India and also exporting to USA since last two years. We are aware of the quality of your esteemed organization is producing and we solicit the chance to be a part of the process. We hope that you will give us a chance to be proud of including your company as our customer. Please feel free to contact us for any further information / clarification in this regard. Thanking you, We remain, Rakesh Nagar-G.M.(09754578650)