Offers on Used rails R50-R65The scrap consists of R50 (51,67 kg/m) R-65 (64,72 kg/m)ISRI-CODES:(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over.Suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, Original weight of 50 pounds per yard and over, 18 inches long and under.(28B) Rail, Steel no. 2 Cropped Rail Ends. Standard section, Original weight of 50 pounds per yard and over, 2 feet long and under.(28C) Rail, Steel No. 2 Cropped Rail Ends. Standard section, Original weight 50 pounds per yard and over, 3 feet long and under.(29) Rail, Steel No. 3 Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds or attachments of any kind except angle bars.Free from concrete, dirt, and foreign material of any kindth rails can be cut to the length the buyer wantsIf interested please sent a LOI or a BCL