CRTM 2-40B for saleThe universal double-strand cold rolling tube mill CRTM 2-40B is destined for cold rolling of high quality tubes from steel, nonferrous metal and alloys with strength in an initial state up to 800 MPa.Finished pipe:Outer diameter of billet, mm � 16�2Tolerance for the diameter, mm � (�.08)Wall thickness, mm � 0.5�0Tolerance for the wall thickness, % � (�5 %)Length, m � 2�Billet:Outer diameter of billet, mm � 32�3.5Tolerance for the diameter, % � (�1.0 %)Wall thickness, mm � 2�2Tolerance for the wall thickness, % � (�6 �10 %)Length, m � 2�The reduction of the cross-section of the billet, %, not more than:- while cold rolling carbonic and alloyed steels � 80- while cold rolling stainless steels � 70General data:Power of the main drive motor, kW � 185 Mill� Engines overall power, kW � 273Production output depending on the range of sizes of the rollable tubes, m/h � 200�00Overall dimensions of the mill:Length, m � 49Width, m � 4.7Elevation from ground level, m � 2.6Embedding of the mill from mill axis � 3.4Overall dimensions of the oil cellar:Length, m � 12.5Width, m � 5.0Embedding from the ground, m � 4.3CRTM 2-40B sketch No. 1-368217 PE and Rolling Scheme are attached.CRTM 2-40B is assembled in research-and-development shop of EZTM JSC and ready for demonstration, rolling trials and sale. Detailed technical description can be provided upon request of interested clients.Contact person: Mr. Sergey Alekseev, Director of International Economics Relations Department, mob.:+7 916 167-8708.